Soft bag kit with 5 reflectors in 25×25 cm size for the Lightstream lighting system using parallel beam light fixtures from Dedolight.
(2) 25x25cm Lightstream reflector. Spread Index 1 (DLR1-25×25)
(1) 25x25cm Lightstream reflector. Spread Index 2 (DLR2-25×25)
(1) 25x25cm Lightstream reflector. Spread Index 3 (DLR3-25×25)
(1) 25x25cm Lightstream reflector. Spread Index 4 (DLR4-25×25)
(4) Supaclamp 5mm flat to 50mm diameter (CLAMP-G)
(4) Sliding lock to attach and lock Lightstream reflectors (DLR-LOCK)
(2) Articulating arm with 16mm stud on each end. 16cm length (DLGA160)
(2) Articulating arm with 16mm stud on each end. 24cm length (DLGA240)
(1) Pouch for up to six 25x25cm reflectors (DLRP25)
Size: 27 x 28 x 7 cm
Weight: 2,3 kg
Less equipment, more lighting precision
Lightstream by Dedolight is a system using reflectors and parallel beam lighting, that makes the quality of the light and shadows become uniquely realistic. The high efficiency of these reflectors within this system derives from reflective values, where approximately 95-98% of the light can be effectively reflected.
- 7 760 kr (ex. mva)
- Les mer / bestill
- 5 130 kr (ex. mva)
- Les mer / bestill
Interview lighting with Dedolight Lightstream reflectors
Pete Burns, lighting cameraman from the UK, introduces and explains his interview lighting kit, which is based on parallel light intensifiers and handy Dedolight Lightstream reflectors.
The Miracles of Parallel Light for the Lightstream Practice
The practice is as old as image creation. Everyone of us has used reflectors. The key and the gate opener to the system is obviously light. Could be the sun, but then, with no sun available, the best results can be reached with parallel light. Our particular pride though is in the evolution of dedolight optical systems, which now culminate in the added parallel beam intensifier for all of our 21 different focusing dedolights.
Om reflektor #1-4
The high efficiency of these reflectors within this system derives from reflective values, where approximately 95-98% of the light can be effectively reflected. When used with Dedolight Parallel Beam Attachments the quality of the light and shadows become uniquely realistic.
Lightstream use four different reflector types, each featuring a different reflecting surface.
On the one hand, the characteristics of the different reflector surfaces play an important role between the hard, narrow exit angle from reflector #1, which is the one to “redirect” light, whilst #2, #3 and #4 is reflectors, because they have a larger exit angle.
Reflector #1 serves the purpose of redirecting the light without changing the beam size and the beam character. The attempt here is to cause a minimum of stray light and a minimum of diffusion. This surface structure provides reflection with an exit angle of about 4°. Reflector #1 is the closest to a very hard reflector and can easily be confused with known mirror reflectors, which don’t have the same characteristics, they indeed sometimes produce spotty and uneven light.
Reflector #2 shows less light intensity at the object, although the total amount of reflected light remains pretty much identical with 95-98%, but due to the wider exit angle of 12°, it makes it more suitable when we want to arrive in the next reflection from the secondary reflector with a larger surface.
Reflector #3 appears to be much gentler, although again the same amount of light gets reflected, but spread over an angle of 50°.
Reflector #4 produces seemingly the most gentle reflection, covers an angle of 95°, and thus, lower values of light level reaching the object, and the virtual light source now, coming very close to the reflector surface, only 4 cm behind the reflector.